Paris (Hinged on one side)
The Paris cover was designed for installation where access from both sides of the belt was not possible. It was first designed as an adaptation of the MADRID model, but over time it became a classic with its own identity.
Completely closed: the fairing covers 180º, up to the conveyor belt frame.
Folds on both sides: our patented C-1 lock-hinge system enables quick conveyor belt access, without having to completely dismantle the cover. Only two nuts have to be loosened.
Dismountable: the París cover can be completely dismantled.
Self-supporting: it does not require any structure.
Quick and simple to install: it adapts to practically all belt conveyors.
Never install all steel angles first; small dimensional differences the covers may have from one another can add up to a large difference in large quantities. Install only eight steel angles and then two covers on them, and so on.
Install the covers alternately, one above and one below, and so on. Do not place them all on top of the previous one, as tiles are installed on a roof.
Tools required: Electric screwdriver with 8mm. socket (for steel angles) or welding equipment (for steel plates), two 10mm. and one 11mm. wrenches.
Stop the belt conveyor before starting the installation.
Use PPE (Personal Protective Equipment) as required by law. CAPOTEX recommends the use of gloves, helmet, safety boots, ear protection and welding mask (for steel plate welding only).
| Model | Format | Fixing | Photo | Steel angle width |
|---|---|---|---|---|
| Paris | Classic | C-1 Lock Hinge (2) |  | 40 mm. |
| 70 mm. | ||||
| Special (on request) | ||||
| C-2 Standard Hinge (2) |  | 40 mm. | ||
| 70 mm. | ||||
| Special (on request) | ||||
| Plus | C-1 Lock Hinge (2) | | 40 mm. | |
| 70 mm. | ||||
| Special (on request) | ||||
| C-2 Standard Hinge (2) | | 40 mm. | ||
| 70 mm. | ||||
| Special (on request) |
Completely closed: the fairing covers 180º, up to the conveyor belt frame.
Folds on both sides: our patented C-1 lock-hinge system enables quick conveyor belt access, without having to completely dismantle the cover. Only two nuts have to be loosened.
Dismountable: the París cover can be completely dismantled.
Self-supporting: it does not require any structure.
Quick and simple to install: it adapts to practically all belt conveyors.
Never install all steel angles first; small dimensional differences the covers may have from one another can add up to a large difference in large quantities. Install only eight steel angles and then two covers on them, and so on.
Install the covers alternately, one above and one below, and so on. Do not place them all on top of the previous one, as tiles are installed on a roof.
Tools required: Electric screwdriver with 8mm. socket (for steel angles) or welding equipment (for steel plates), two 10mm. and one 11mm. wrenches.
Stop the belt conveyor before starting the installation.
Use PPE (Personal Protective Equipment) as required by law. CAPOTEX recommends the use of gloves, helmet, safety boots, ear protection and welding mask (for steel plate welding only).
| Curvature shape | Fixing | Steel angle width |
|---|---|---|
| Classic | C-1 Lock Hinge (2) | 40 mm. |
| 70 mm. | ||
| Special (on request) | ||
| C-2 Standard Hinge (2) | 40 mm. | |
| 70 mm. | ||
| Special (on request) | ||
| Plus | C-1 Lock Hinge (2) | 40 mm. |
| 70 mm. | ||
| Special (on request) | ||
| C-2 Standard Hinge (2) | 40 mm. | |
| 70 mm. | ||
| Special (on request) |
